Fuser’s Glue

       To hold stringers and other

       pieces of glass to the base

       glass while fusing. 

       Burns off clean without

       a residue.

       1 litre bottle in powder form.

       Requires mixing with water.

    Plain Bowl

          (Drape Mould)

          140mm x 35mm

         Spray A

         Made from a clear, low melting

         point glass ground to

         micron size in a spray medium. 

         Spray A is basically an

         over-glaze which is applied

         to fused projects when they

         are ready for firing to

         prevent de-vitrification on

         the glass surface. 

         Also capable of repairing

         problem areas on fired projects.

          Ripple Bowl

          (Drape Mould)

          318mm x 51mm

         Applied by hand spray diffuser - not provided.

         236ml.

          Round Plate

          (Slump Mould)

          254mm Diameter

         Sifter

         For storing and applying

         glass powders, enamels, etc. 

         Transparent plastic with a

         fine metal sieve in the

         nylon cap.

          Curved Plate

          (Slump Mould)

          305mm x 38mm

         High Temp Wire

         Can be fused into glass for

         hangers, used for shaping

         glass during bending and

         also for supporting

         items in the kiln.

         4.2 metre rolls.

          Round Bowl

          (Slump Mould)

          381mm x 102mm

         Available in two thicknesses:

         0.5mm and 1.5mm.