EQUIPMENT

           Float Glass Tin Detector

           The Detector enables you to determine which is

           the tin side of your float glass - as you need to

           fuse onto the non-tin side of the sheet. 

           Simply place the Shortwave UV window against

           the glass, the tin side will appear foggy and the

           reverse side will be clear.

    Mouldable Fibre

           A ready to use mouldable compound which can

           be used to take imprints of three dimensional

           objects such as shells can be moulded to any

           desired shape.

           Withstands approximately 30 - 50 firings.

           Supplied with firing instructions.

           Duraboard

           For forming shapes to fuse glass over. 

           Used with Mould Hardener. 

           1metre x 610mm.  10mm thick

           Mould Hardener

           Apply to Duraboard with a brush to harden your
           mould.  945ml.

           Moulding Felt

           Ceramic fibre wet felt for making moulds when

           glass bending.  600mm x 910mm.

           Shelf Paper

           Eliminates the need for Batt Wash or Shelf Primer.

           1 metre wide, 1mm thick.

           Batt Wash

           A shelf primer.  Mix with water and paint onto the

           kiln shelf to prevent glass sticking to the shelf.

           Available in 150g and 1kg.

           Glass Release Compound

           Ideal as a primer for Mouldable Fibre.

           Mix with water then paint onto any pre-fired mould
           to prevent glass sticking to it.  1kg.

           Users of shortwave UV should ALWAYS protect            themselves by wearing long sleeves and a
           UV protective face shield - please read safety
           and working instructions carefully.
           Face shields are available by special order.

           Fusing Gloves

           Two layer, machine knitted gloves for protection            against kiln heat and hot glass.

           Outer layer is 100% Kevlar and inner layer is

           100% cotton to assist in ventilation and comfort.

           The gloves also provide extra protection against            slash cut, tear and abrasion when handling

           hot objects. 

           340mm long.

           Haik Brush

           The best type of brush for

           applying Shelf Primer to

           the kiln shelf.

           Polarizing sheet

           Use two sheets together to visually test for

           glass compatibility and annealing stress in

           fused pieces.

           210mm x 145mm