|
GRINDING HEADS |
|
ACCESSORIES |
|
Glastar Bonded Heads
The diamonds are bonded to the head making it
far longer lasting than plated heads, smoother
to the touch and faster to cool.
Average grinding hours: 200 to 300
(based on 3mm glass using 19mm head). |
|
Replacement Top Plates |
| |
|
Available for G81,
G121 and G141. |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
Sizes Available: |
|
| |
25mm Bonded Head
Standard or Fine Grit
For G81 and new G121
and G141 models. |
|
|
| |
|
|
| |
|
Mini Tables |
| |
|
Available for G81, G121 and G141.
For use when grinding with
the 6mm head. |
| |
|
| |
|
| |
|
|
A water well keeps
the head lubricated. |
|
| |
19mm Bonded Head
Standard or Fine Grit
For G81, G121 and
G141 models. |
|
|
| |
|
| |
|
| |
|
| |
|
|
| |
|
|
| |
|
|
Moulded Plastic Eye Shield |
| |
6mm Bonded
Drilling and Grinding Head
In order to be able to grind
tight inside curves and drill holes. |
|
|
Fits G121 and G141 models.
Size: 13mm x 10½mm. |
 |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
| |
6mm Adaptor
This Adaptor is required for use
with the 6mm head on old
G121 and G141 models. |
|
|
Glass Eye Shield Support |
| |
|
Supplied with G181 - fits all models. |
| |
|
Supports a 4mm piece of glass
(not included) which acts
as an eye shield. |
|
| |
|
| |
|
|
|
| |
(The motor shafts on some model Grinders have been
modified so there is no need for the 6mm head adaptor.
The 6mm head simply screws into the motor shaft.) |
|
| |
|
| |
|
| |
|
|
| |
|
|
|
| |
Maintenance Help
Increase the life of your grinder head:
|
| |
1) When the original grinding position becomes worn, move the position of the head down to provide a
new grinding surface.
2) Always make sure the head is kept lubricated. Clean the sponge, after one hours grinding
and the water reservoir after 4 hours grinding.
3) Never grind metal, this will make the head unusable for glass in seconds.
|
| |
| |
| |
| |
| |
